ola_usbpro
Section: User Commands (1)
Updated: July 2013
Index
Return to Main Contents
NAME
ola_usbpro - Configure Enttec USB Pro Devices managed by OLA.
SYNOPSIS
ola_usbpro
-d <dev_id> [--serial | -p <port> --g | -p <port> -b <brk> -m <mab> -r <rate>]
DESCRIPTION
ola_usbpro
is used to query and control the parameters of Enttec USB Pro devices.
OPTIONS
- -a, --assignments
-
Get the port assignments.
- -b, --brk <break>
-
Set the break time (9 - 127).
- -d, --device <device>
-
Id of the device to control.
- -g, --get-params
-
Get the current parameters.
- -h, --help
-
Display the help message
- -l, --log-level <int8_t>
-
Set the logging level 0 .. 4.
- -m, --mab <man>
-
Set the make after-break-time (1 - 127).
- -p, --port <port>
-
The port to configure.
- -r, --rate <rate>
-
Set the transmission rate (1 - 40).
- -s, --serial
-
Get the serial number.
- -v, --version
-
Display version information
- --syslog
-
Send to syslog rather than stderr.
- --no-use-epoll
-
Disable the use of epoll(), revert to select()
- --no-use-kqueue
-
Disable the use of kqueue(), revert to select()
- --scheduler-policy <policy>
-
The thread scheduling policy, one of {fifo, rr}.
- --scheduler-priority <priority>
-
The thread priority, only used if --scheduler-policy is set.
EXAMPLES
See the current parameters of port 0 of device 9:
ola_usbpro -d 9 -p 0 --get-params
See the port assignments of device 9:
ola_usbpro -d 9 --assignments
Set the packet rate of port 0 of device 9 to 40 packets/s:
ola_usbpro -d 9 -p 0 -r 40
See the serial number of device 9:
ola_usbpro -d 9 --serial
SEE ALSO
olad(1),
usbpro_firmware(1),
Index
- NAME
-
- SYNOPSIS
-
- DESCRIPTION
-
- OPTIONS
-
- EXAMPLES
-
- See the current parameters of port 0 of device 9:
-
- See the port assignments of device 9:
-
- Set the packet rate of port 0 of device 9 to 40 packets/s:
-
- See the serial number of device 9:
-
- SEE ALSO
-
This document was created by
man2html,
using the manual pages.
Time: 07:39:48 GMT, January 03, 2023