ola::acn Namespace Reference

Detailed Description

ACN related code.

Classes
class	BaseDMPAddress
class	BaseInflator
class	CID
	The ACN component identifier. More...
class	CIDImpl
class	DMPAddress
class	DMPAddressData
class	DMPE131Inflator
class	DMPGetProperty
class	DMPHeader
class	DMPInflator
class	DMPPDU
class	DMPSetProperty
class	E131DiscoveryInflator
class	E131Header
class	E131Inflator
class	E131InflatorRev2
class	E131Node
class	E131PDU
class	E131Rev2Header
class	E131Sender
class	E133Header
class	E133Inflator
class	E133PDU
class	E133StatusInflator
class	E133StatusPDU
class	HeaderSet
class	IncomingStreamTransport
class	IncomingTCPTransport
class	IncomingUDPTransport
class	InflatorInterface
class	NullInflator
class	OutgoingTransport
class	OutgoingUDPTransport
class	OutgoingUDPTransportImpl
class	PDU
class	PDUBlock
class	PreamblePacker
class	RangeDMPAddress
class	RDMInflator
class	RDMPDU
class	RootHeader
class	RootInflator
class	RootPDU
class	RootSender
class	TrackedSource
class	TransportHeader

Typedefs
typedef DMPAddress< uint8_t >	OneByteDMPAddress
typedef DMPAddress< uint16_t >	TwoByteDMPAddress
typedef DMPAddress< uint32_t >	FourByteDMPAddress
typedef RangeDMPAddress< uint8_t >	OneByteRangeDMPAddress
typedef RangeDMPAddress< uint16_t >	TwoByteRangeDMPAddress
typedef RangeDMPAddress< uint32_t >	FourByteRangeDMPAddress

Enumerations
enum	RootVector { VECTOR_ROOT_E131_REV2 = 3, VECTOR_ROOT_E131 = 4, VECTOR_ROOT_E133 = 5, VECTOR_ROOT_NULL = 6 }
	ACN vectors used at the root layer. More...
enum	DMPVector { DMP_GET_PROPERTY_VECTOR = 1, DMP_SET_PROPERTY_VECTOR = 2 }
	Vectors used at the DMP layer. More...
enum	E131Vector { VECTOR_E131_DATA = 2, VECTOR_E131_SYNC = 3, VECTOR_E131_DISCOVERY = 4 }
	Vectors used at the E1.31 layer. More...
enum	E133Vector { VECTOR_FRAMING_RDMNET = 1, VECTOR_FRAMING_STATUS = 2, VECTOR_FRAMING_CONTROLLER = 3, VECTOR_FRAMING_CHANGE_NOTIFICATION = 4 }
	Vectors used at the E1.33 layer. More...
enum	E133ControllerVector {   VECTOR_CONTROLLER_FETCH_DEVICES = 1, VECTOR_CONTROLLER_DEVICE_LIST = 2, VECTOR_CONTROLLER_DEVICE_ACQUIRED = 3, VECTOR_CONTROLLER_DEVICE_RELEASED = 4,   VECTOR_CONTROLLER_EXPECT_MASTER = 5 }
	Vectors used at the E1.33 Controller layer. More...
enum	dmp_address_size { ONE_BYTES = 0x00, TWO_BYTES = 0x01, FOUR_BYTES = 0x02, RES_BYTES = 0x03 }
enum	dmp_address_type { NON_RANGE = 0x00, RANGE_SINGLE = 0x01, RANGE_EQUAL = 0x02, RANGE_MIXED = 0x03 }

Functions
unsigned int	DMPSizeToByteSize (dmp_address_size size)
const BaseDMPAddress *	NewSingleAddress (unsigned int value)
const BaseDMPAddress *	NewRangeAddress (unsigned int value, unsigned int increment, unsigned int number)
const BaseDMPAddress *	DecodeAddress (dmp_address_size size, dmp_address_type type, const uint8_t *data, unsigned int *length)
template<typename type >
dmp_address_size	TypeToDMPSize ()
const DMPPDU *	NewDMPGetProperty (bool is_virtual, bool is_relative, unsigned int start)
const DMPPDU *	NewRangeDMPGetProperty (bool is_virtual, bool is_relative, unsigned int start, unsigned int increment, unsigned int number)
template<typename type >
const DMPPDU *	NewDMPGetProperty (bool is_virtual, bool is_relative, const std::vector< DMPAddress< type > > &addresses)
template<typename type >
const DMPPDU *	_CreateDMPGetProperty (bool is_virtual, bool is_relative, unsigned int start)
template<typename type >
const DMPPDU *	NewRangeDMPGetProperty (bool is_virtual, bool is_relative, const std::vector< RangeDMPAddress< type > > &addresses)
template<typename type >
const DMPPDU *	_CreateRangeDMPGetProperty (bool is_virtual, bool is_relative, unsigned int start, unsigned int increment, unsigned int number)
template<typename type >
const DMPPDU *	NewDMPSetProperty (bool is_virtual, bool is_relative, const std::vector< DMPAddressData< DMPAddress< type > > > &chunks)
template<typename type >
const DMPPDU *	NewRangeDMPSetProperty (bool is_virtual, bool is_relative, const std::vector< DMPAddressData< RangeDMPAddress< type > > > &chunks, bool multiple_elements=true, bool equal_size_elements=true)

Variables
const uint16_t	ACN_PORT = 5568
	The port used for E1.31 & SDT communication.
const uint16_t	E133_PORT = 5569
	The port used for E1.33 communication.
static const unsigned int	MAX_TWO_BYTE = 0xffff
static const unsigned int	MAX_ONE_BYTE = 0xff
const uint8_t	ACN_HEADER []
const unsigned int	ACN_HEADER_SIZE = sizeof(ACN_HEADER)

Variable Documentation

const uint8_t ola::acn::ACN_HEADER[]

Initial value:

= {
  0x00, 0x14,  
  0x00, 0x00,  
  0x41, 0x53, 0x43, 0x2d,
  0x45, 0x31, 0x2e, 0x31,
  0x37, 0x00, 0x00, 0x00
  
}