Detailed Description

Used to hold a single universe of DMX data.

DmxBuffer is used to hold a single universe of DMX data. This class includes functions to translate to/from strings, and manipulate channels in the buffer.

Note: DmxBuffer uses a copy-on-write (COW) optimization, more info can be found here: http://en.wikipedia.org/wiki/Copy-on-write; This class is NOT thread safe.

Public Member Functions
	DmxBuffer ()
	DmxBuffer (const DmxBuffer &other)
	Copy constructor. We just copy the underlying pointers and mark m_copy_on_write as true if the other buffer has data.
	DmxBuffer (const uint8_t *data, unsigned int length)
	Create a new buffer from raw data.
	DmxBuffer (const std::string &data)
	Create a new buffer from a string.
	~DmxBuffer ()
	Destructor.
DmxBuffer &	operator= (const DmxBuffer &other)
	Assignment operator used to make this buffer equal to another buffer.
bool	operator== (const DmxBuffer &other) const
	Equality operator used to check if two DmxBuffers are equal.
bool	operator!= (const DmxBuffer &other) const
	Inequality operator used to check if two DmxBuffers are not equal.
unsigned int	Size () const
	Current size of DmxBuffer.
bool	HTPMerge (const DmxBuffer &other)
	HTP Merge from another DmxBuffer.
bool	Set (const uint8_t *data, unsigned int length)
	Set the contents of this DmxBuffer.
bool	Set (const std::string &data)
	Set the contents of this DmxBuffer equal to the string.
bool	Set (const DmxBuffer &other)
	Sets the data in this buffer to be the same as the other one. This forces a copy of the data rather than using copy-on-write.
bool	SetFromString (const std::string &data)
	Set values from a string. Convert a comma separated list of values into for the DmxBuffer. Invalid values are set to 0. 0s can be dropped between the commas.
bool	SetRangeToValue (unsigned int offset, uint8_t data, unsigned int length)
	Set a Range of data to a single value. Calling this on an uninitialized buffer will call Blackout() first. Attempted to set data with an offset greater than Size() is an error.
bool	SetRange (unsigned int offset, const uint8_t *data, unsigned int length)
	Set a range of data. Calling this on an uninitialized buffer will call Blackout() first. Attempting to set data with an offset > Size() is an error.
void	SetChannel (unsigned int channel, uint8_t data)
	Set a single channel. Calling this on an uninitialized buffer will call Blackout() first. Trying to set a channel more than 1 channel past the end of the valid data is an error.
void	Get (uint8_t data, unsigned int length) const
	Get the contents of this DmxBuffer. This function copies the contents of the DmxBuffer into the memory region pointed to by data.
void	GetRange (unsigned int slot, uint8_t data, unsigned int length) const
	Get a range of values starting from a particular slot.
uint8_t	Get (unsigned int channel) const
	This function returns the value of a channel, and returns 0 if the buffer wasn't initialized or the channel was out-of-bounds.
const uint8_t *	GetRaw () const
	Get a raw pointer to the internal data.
std::string	Get () const
	Get the raw contents of the DmxBuffer as a string.
bool	Blackout ()
	Set the buffer to all zeros.
void	Reset ()
	Reset the bufer to hold no data.
std::string	ToString () const
	Convert the DmxBuffer to a human readable representation.

Constructor & Destructor Documentation

ola::DmxBuffer::DmxBuffer ( )

Constructor This initializes and empty DmxBuffer, Size() == 0

ola::DmxBuffer::DmxBuffer ( const DmxBuffer & other )

Copy constructor. We just copy the underlying pointers and mark m_copy_on_write as true if the other buffer has data.

Parameters

other The other DmxBuffer to copy from

ola::DmxBuffer::DmxBuffer	(	const uint8_t *	data,
		unsigned int	length
	)

Create a new buffer from raw data.

Parameters

data	is a pointer to an array of data used to populate DmxBuffer
length	is the length of data in array data

ola::DmxBuffer::DmxBuffer ( const std::string & data )

explicit

Create a new buffer from a string.

Parameters

data	is a string of raw data values

Deprecated:: Use DmxBuffer(const uint8_t *data, unsigned int length) instead

Member Function Documentation

bool ola::DmxBuffer::Blackout ( )

Set the buffer to all zeros.

Postcondition: Size() == DMX_UNIVERSE_SIZE

void ola::DmxBuffer::Get	(	uint8_t *	data,
		unsigned int *	length
	)		const

Get the contents of this DmxBuffer. This function copies the contents of the DmxBuffer into the memory region pointed to by data.

Parameters

data	is a pointer to an array to store the data from DmxBuffer
length	is a pointer to the length of data

Postcondition: *length == Size()

uint8_t ola::DmxBuffer::Get ( unsigned int channel ) const

This function returns the value of a channel, and returns 0 if the buffer wasn't initialized or the channel was out-of-bounds.

Parameters

channel is the channel to return

Returns: the value for the requested channel, returns 0 if the channel does not exist

string ola::DmxBuffer::Get ( ) const

Get the raw contents of the DmxBuffer as a string.

Returns: a string of raw channel values

void ola::DmxBuffer::GetRange	(	unsigned int	slot,
		uint8_t *	data,
		unsigned int *	length
	)		const

Get a range of values starting from a particular slot.

Parameters

	slot	is the dmx slot to start from
	data	is a pointer to where you want to store the gathered data
[in,out]	length	is the length of the data you wish to retrieve

const uint8_t* ola::DmxBuffer::GetRaw ( ) const

inline

Get a raw pointer to the internal data.

Returns: constant pointer to internal data

bool ola::DmxBuffer::HTPMerge ( const DmxBuffer & other )

HTP Merge from another DmxBuffer.

Parameters

other the DmxBuffer to HTP merge into this one

Returns: false if the merge failed, and true if merge was successful

bool ola::DmxBuffer::operator!= ( const DmxBuffer & other ) const

Inequality operator used to check if two DmxBuffers are not equal.

Parameters

other is the other DmxBuffer to check against

Returns: true if not equal and false if the are equal

DmxBuffer & ola::DmxBuffer::operator= ( const DmxBuffer & other )

Assignment operator used to make this buffer equal to another buffer.

Parameters

other the other DmxBuffer to copy/link from

bool ola::DmxBuffer::operator== ( const DmxBuffer & other ) const

Equality operator used to check if two DmxBuffers are equal.

Parameters

other is the other DmxBuffer to check against

Returns: true if equal, and false if not

void ola::DmxBuffer::Reset ( )

Reset the bufer to hold no data.

Postcondition: Size() == 0

bool ola::DmxBuffer::Set	(	const uint8_t *	data,
		unsigned int	length
	)

Set the contents of this DmxBuffer.

Parameters

data	is a pointer to an array of uint8_t values
length	is the size of the array pointed to by data

Returns: true if the set was successful, and false if it failed

Postcondition: Size() == length

bool ola::DmxBuffer::Set ( const std::string & data )

Set the contents of this DmxBuffer equal to the string.

Parameters

data	the string with the dmx data

Returns: true if the set was successful and false if it failed

Postcondition: Size() == data.length()

bool ola::DmxBuffer::Set ( const DmxBuffer & other )

Sets the data in this buffer to be the same as the other one. This forces a copy of the data rather than using copy-on-write.

Parameters

other is another DmxBuffer with data to point to/copy from

Returns: true if the set was successful and false if it failed

Postcondition: Size() == other.Size()

void ola::DmxBuffer::SetChannel	(	unsigned int	channel,
		uint8_t	data
	)

Set a single channel. Calling this on an uninitialized buffer will call Blackout() first. Trying to set a channel more than 1 channel past the end of the valid data is an error.

Parameters

channel	is the dmx channel you want to change
data	is the value to set channel

bool ola::DmxBuffer::SetFromString ( const std::string & data )

Set values from a string. Convert a comma separated list of values into for the DmxBuffer. Invalid values are set to 0. 0s can be dropped between the commas.

Parameters

data	the string to split

Returns: true if the set was successful and false if it failed

Example: Here is an example of the string format used:
dmx_buffer.SetFromString("0,1,2,3,4")

The above code would set channels 1 through 5 to 0,1,2,3,4 respectively, and
dmx_buffer.SetFromString(",,,,,255,255,128")

would set channel 1 through 5 to 0 and channel 6,7 to 255 and channel 8 to 128.

bool ola::DmxBuffer::SetRange	(	unsigned int	offset,
		const uint8_t *	data,
		unsigned int	length
	)

Set a range of data. Calling this on an uninitialized buffer will call Blackout() first. Attempting to set data with an offset > Size() is an error.

Parameters

offset	the starting channel
data	a pointer to the new data
length	the length of the data

Returns: true if the call successful and false if it failed

bool ola::DmxBuffer::SetRangeToValue	(	unsigned int	offset,
		uint8_t	data,
		unsigned int	length
	)

Set a Range of data to a single value. Calling this on an uninitialized buffer will call Blackout() first. Attempted to set data with an offset greater than Size() is an error.

Parameters

offset	the starting channel
data	is the value to set the range to
length	the length of the range to set

Returns: true if the call successful and false if it failed

unsigned int ola::DmxBuffer::Size ( ) const

inline

Current size of DmxBuffer.

Returns: the current number of slots in the buffer.

string ola::DmxBuffer::ToString ( ) const

Convert the DmxBuffer to a human readable representation.

Returns: a string in a human readable form

Example: Here is an example of the output.
"0,0,255,128,100"

The documentation for this class was generated from the following files:

include/ola/DmxBuffer.h
common/utils/DmxBuffer.cpp

Detailed Description

Public Member Functions

Constructor & Destructor Documentation

Member Function Documentation